SM5430
Acryl-R® SM5430 Sealant is a high-performance, high-strength, non-peel, non-drying roofing sealant (SSR) and insulation panel based on a unique elastomer that provides a non-fibrous consistency and excellent resistance to harsh environmental conditions. heat, cold and humidity. Specially developed for precise application in hidden joints of panels for rolling lines (standing groove roof panels). has excellent cutting properties and is not stringy or messy when applied. It’s also designed to seal the warm side of concealed exterior polyurethane foam panels to create a vapor tight seal. It is formulated without asbestos fillers.
FUNCTION
Excellent adhesion to oiled GALVALUME®, GALVALUME PLUS®, ACRYLUME®, ZINCALUME®, Kynar 500®, aluminium, aluminium steel, polyvinyl fluoride and siliconized polyester painted metal, concrete, FRP and glass Remains permanently soft and tacky Designed for cold storage (low temperature) application Sealant easily bonds and transfers to male joint Factory-sealed panels can be field erected up to six months after factory sealing Minimal shrinkage No cracking or loss of adhesion at -60°F Operating temperature range -60°F to 200°F range operating temperatures 10°F to 120°F Resists fungal attack and will not promote mould growth Excellent for sealing between dissimilar metals to prevent electrolysis
PACKAGING
10.1 oz Cartridge (30 cartridges / case)20 oz. Sausage (12 sausages / case)5 Gal. Bucket 55 Gal. Drum
COLOR
- White
APPROVAL
ASTM E1680 Air Infiltrations E1646, water infiltration into exterior roof panel systems by uniform static air pressure difference, does not allow any water leakage
How do you use Acryl in R?
- Attach the applicator to the Acryl-R can by screwing clockwise. • Fill the applicator head by squeezing the handle – it takes a few. • Use soap and water to clean the area where the new Acryl-R will be applied. …• Start at a seam or joint and apply sealant to the seam by pulling/pulling the applicator head.
What is uncoated roofing sealant?
High performance roofing sealant. A high-strength, non-drying, non-drying SSR sealant with a unique elastomer that provides a string-free consistency and tremendous resistance to environmental conditions such as heat, cold and humidity.
What does skin mean?
Uncoated is a type of sealant or finishing system that does not form a coating when it dries.
What is Kingspan Butyl Sealant used for without surface treatment?
BED SEALANT Used as a sealant for frames, sills or bedding when applied to metal or glass surfaces. It prevents the penetration of air and the leakage of water into the unexposed joints of the perimeter walls.
What is butyl sealant?
Tremco Butyl Sealant is used to seal joints in applications such as hinge joints, metal panel joints, bed sills, secondary glazing seals and areas where sealing against Tremco Neoprene or EPDM seals is required.
Is butyl sealant UV resistant?
Butyl tape, like non-skinning and non-curing sealants, should have never be used in applications that are exposed to UV light. UV light will break down the sealant over time.
- SM 5430 ACRYL-R SEALANT NOT SKIN
- case of 30, 10 oz Sealing Tubes
High performance roofing sealant. A high-strength, non-drying, non-drying SSR sealant with a unique elastomer that provides a string-free consistency and tremendous resistance to environmental conditions such as heat, cold and humidity. Useful in the application of radon and steam to seal the warm side of concealed exterior polyurethane foam panels.
High performance roofing sealant. A high-strength, non-drying, non-drying SSR sealant with a unique elastomer that provides a string-free consistency and tremendous resistance to environmental conditions such as heat, cold and humidity. Useful in the application of radon and steam to seal the warm side of concealed exterior polyurethane foam panels.
READ RELATED : /5-in-1-led-skin-tightening-how-to-use/
ALSO FOLLOW: BEAUTY
